Alloy Wheels

Clean, Keyed, Paint-Ready.

Our solutions provide the best paint-ready finish for 99% of wheels in as little as 2 hours.


Painted alloy wheel prior to stripping

Before Stripping
An Aluminium alloy wheel, ready to be stripped

Painted wheel during stripping

During Stripping
The paint is lifted off the surface by our specially formulated stripper

Painted will with paint removed after stripping

After Stripping
A clean, keyed, paint ready surface, ready to be refurbished and painted



AL-Strip EC

Our flagship "one pot" non-methylene chloride product for the average stripping business.

AL-Strip EC is a heated benzyl alcohol based paint stripper and has been specifically designed as a low capital investment solution for small to medium operations. 

By composition, it contains no methylene chloride (DCM).

Typical strip times for AL-Strip EC range between 1 and 4 hours dependent upon operating temperature and the condition of the wheel.

Recommended use for AL-Strip EC is for businesses stripping up to 100 wheels per week per tank.

Note: AL-Strip EC is not suitable for magnesium wheels.


Supplied in 25 L Drums, 200 L Drums, and 1000 L IBCs 





AL-Strip W

The tried and tested powerhouse.

With over 20 years experience in the industry, AL-Strip W is the benzyl alcohol based hot strip workhorse that has served many major wheel refurbishers throughout the UK.

Free from methylene chloride, AL-Strip W is recommended for high throughput work over 100 wheels per week per tank.

Maintenance for an AL-Strip W system is minimal and is carried out through the use of a filter press which will keep your chemical in check.

With a dedicated range of replenishment chemicals, an AL-Strip W tank can run indefinitely.


Supplied in 200 L Drums, and 1000 L IBCs






EFX 

The fastest, most cost-effective way to strip wheels.

The original and arguably the quickest way to strip wheels, EFX is a solvent based cold stripper capable of stripping the vast majority of wheels in as little as two hours.

Containing methylene chloride and accelerators, EFX has been specifically formulated to be strip wheels.

Similar to AL-Strip EC, the paint is lifted from the surface of the metal, therefore requiring minimal extra input from the user, aside from adequate ventilation, and manual scoop filtration.

Note: The European Solvent Emissions Directive limits the use of Methylene Chloride-based chemicals to 1 tonne per year.


Supplied in 25 L Drums, 200 L Drums, and 1000 L IBCs