BJ-STRIP paint stripper without dichloromethane paint remover for jig stripping from Confederate Chemicals BJ-STRIP paint remover without methylene chloride
Over 30 years experience of industrial chemical paint and powder coating removal

| Home | Aluminium Stripping | Alloy Wheel Stripping | Electrocoat Stripping | Cold Solvent Stripping | Overview | Plant | Links and Suppliers | Legal Info |
To cut down on Spam, our email address may be hidden. Allow blocked Internet Explorer active content if you cannot see "Contact Us"
Stripping polyester powder, epoxy-polyester powder and many wet paints from jigs and steel components can be carried out with similar techniques to that shown for aluminium components. In this case BJ-STRIP is the preferred material and has the following benefits:
  • Speed: BJ-STRIP is much more strongly alkaline than WR-STRIP
  • Suitable for use with multiple coatings
  • Does not cause heat distortion
  • Does not detemper spring loaded jig tips
  • Does not alter dimensions of threaded components
  • Can be completely drained from difficult profiles, unlike fluidised beds which can retain sand and ovens which can retain ash
BJ STRIP can be used to remove difficult coatings from aluminium, but only under very controlled conditions which do not allow water contamination of the bath.

BJ-STRIP See Technical Data Sheet for process details and control
Typical Plant Diagram

Confederate Chemicals Ltd., Mochdre Industrial Estate
Newtown, Powys, SY16 4LE, Wales UK.    Tel: 44 (0) 1686 627158    Fax: 44 (0) 1686 627580

Copyright Confederate Chemicals Limited
 All rights reserved